Description Of The Controls; Upper Panel; Setting The Washing Program And Switching On And Off - SCHOLTES LTE S3 XL60HZ Instructions Pour L'installation

7 DESCRIPTION OF THE CONTROLS

EN

7.1 Upper panel

All the dishwasher controls are grouped on the upper
panel (see fig. 7-01). The dishwasher can only be
switched on, programmed, switched off, etc. with the
door open. A brief description (see tab. 7-01) of the
various controls on the upper panel is given below.
Fig. 7-01
7.2 Setting the washing program and
switching on and off
The dishwasher is equipped with a control panel (see fig.
7-02) which is used to program the appliance and switch
it on and off.
Fig. 7-02
24
On/Off button
1
Press to power the appliance.
Program indicator lights
2 These show which program is selected and whether there are
any faults (Troubleshooting).
Program selection button
3
Press in sequence to select the required program.
Add rinse aid
4
Shows the appliance has run out of rinse aid.
Supplementary program button
5 Press to select one of the five supplementary programs (see
table).
Supplementary program indicator light
6 Shows that one of the five supplementary programs will be run
(see table).
Sanitation indicator light
7
Shows that the function is active.
Half-load wash button
8
Press to select the half-load wash option.
Half-load indicator lights
9 One of the lights shines to show that the half-load wash
function has been selected in the upper or lower rack.
Program delay button
10
Press to delay the start of the program up to 9 hours.
11 Display (only fitted on some models)
Tab. 7-01