Technical Data - Bosch GLI PocketLED Professional Notice Originale

OBJ_BUCH-2511-001.book Page 8 Wednesday, April 1, 2015 11:04 AM
8 | English

Technical Data

Cordless Worklight
Article number
Rated voltage
Lighting duration, approx.
Luminous flux
Weight according to EPTA-Procedure 01/2003
Permitted ambient temperature
– during charging
*
– during operation and during storage
Recommended batteries
Recommended chargers
* Limited performance at temperatures <0 °C
The colour rendition of illuminated objects can be distorted.
Assembly
Battery Charging (Accessory) (see figure A)
 Use only the battery chargers listed on the accessories page. Only these bat-
tery chargers are matched to the lithium ion battery of your cordless worklight.
Note: The battery supplied is partially charged. To ensure full capacity of the battery,
completely charge the battery in the battery charger before using your power tool for
the first time.
The lithium-ion battery can be charged at any time without reducing its service life. In-
terrupting the charging procedure does not damage the battery.
The lithium-ion battery is protected against deep discharging by the "Electronic Cell
Protection (ECP)". When the battery is empty, the cordless worklight is switched off
by means of a protective circuit.
 Do not continue to press the On/Off switch after the cordless worklight has
been automatically switched off. The battery can be damaged.
To remove the battery 3, press the battery unlocking button 4 and pull the battery out
of the cordless worklight toward the rear. Do not exert any force.
Observe the notes for disposal.
1 609 92A 15D | (1.4.15)
GLI PocketLED
3 601 D37 V..
V= 10.8
min/Ah 590
lm 80
kg 0.3
°C 0...+45
°C –20...+50
GBA 10,8 V ...
AL 11 ..
Bosch Power Tools