Connecting To A Tv - Lorex Vantage LW2231 Mode D'emploi

Connecting to a TV

6. Connecting to a TV
1 Connect the included BNC-to-RCA adapter to the BNC connector on the receiver. Connect the
other end of the BNC-to-RCA adapter to the RCA video input on your television.
2 Connect the RCA audio connector from the receiver to the audio input on your television.
3 Connect the power cable to the power port on the receiver and plug it into a power outlet or
surge protector.
4 Power on your television and select the input that the receiver is connected to.
5 Place the receiver where it will have clear reception to your camera
1. Avoid installing in a location which requires the wireless signal to pass through cement, con-
crete, and metal structures. This will reduce the range of transmission.
8
1
2
3
1
.