Canon EOS Rebel T7 Mode D'emploi page 154

Easy Image Transfer Using the NFC Function
Terminating the Connection
If necessary, also read "NFC Function Cautions" (p.W-15).

While connected, a picture cannot be taken even if the camera's shutter

button is pressed.
Images cannot be sent using the NFC function while the camera is

connected to another device wirelessly. In addition, the camera cannot
be connected to multiple smartphones at the same time.
Even if movies are displayed in the list, they cannot be saved to a

smartphone.
If you send RAW images to a smartphone, the high ISO speed noise

reduction effect of saved images on the smartphone may become
smaller. Therefore, if you shoot RAW images, setting the image-
recording quality to 1+73 is recommended.
You can cancel the image transfer by selecting [Cancel] during the

transfer.
You can select up to 50 files at a time.

While connected, disabling the smartphone's power saving function is

recommended.
Settings for image transfer using the NFC function are not saved on the

camera.
When you reduce the image size, all images to be sent at the same time

are resized. Images that are smaller than b size are not reduced.
If you send RAW images to a smartphone, they will be resized to b and

saved.
The camera's <k> lamp will blink rapidly when data is being sent.

When you use a battery to power the camera, make sure it is fully

charged.
While connected, the camera's auto power off does not function.

W-34
To end the image transfer, press the

<M> button on the image transfer
screen.
Select [OK] on the confirmation

dialog to terminate the connection.