Projection Unit - Denver CRP-618 Mode D'emploi

Sleep operation
When listening to radio, press Sleep button (3) to enter sleep mode.
You can just adjust the sleep timer from 90 mins to 15 mins by
pressing the Sleep button (3). The unit will automatically turn off after
the selected time.
Dimmer control
In standby mode, press the DIMMER (3) button allows you to set the
brightness of the LED display to high, medium ,low 3 levels.
1. The clock display with dimmer low is the default setting.
2. It will consume more power if you set the clock display with dimmer
higher
NAP timer function (count down timer)
During radio off mode, press the NAP button (10), to turn on the NAP
mode, the NAP time will keep by 5 seconds, within 5 seconds and
press NAP button (10) button can change the duration from 90 min –
10 min.
The alarm buzzer will sound for 30 min and then shut off automatically.
To stop the alarm buzzer, press the ON/OFF button (4).
Press the NAP button (10) has no effect during alarm operation. Press
ON/OFF button (4) to cancel NAP function.
Select DST (daylight saving time) mode
For countries with daylight saving time (DST) the clock radio offers you
DST option to adjust summer time.
In standby mode press and hold the DST button (3) for 3 seconds. The
clock advances by one hour.
To exit DST mode, repeat the above operation.

Projection unit

- Focus setting : Adjust the projection clock brightness/focus by
turning the brightness/focus adjustment wheel unit the projected
time is clearly shown on the ceiling or wall.
- Adjust projected direction.
- To flip projected image by 180°, press PROJECTION TIME 180°
FLIP button (2).
ENG-5