Denver CRP-618 Mode D'emploi page 4

Select alarm weekday mode as follows
1-5 : Monday to Friday
1-7 : Whole week
6-7 : Saturday & Sunday
1-1 : One day of week
Action (during data adjustment) :
- Press << / Tune - button (11) to adjust data backward.
- Press >> / Tune + button (12) to adjust data forward.
- Keep depress << or >> button for 2 seconds to enable auto
forward.
Enable / disable the Alarm
Press and hold the "ALARM 1" (13) / "ALARM 2" (14) button to enable
or disable the alarm. Once the alarm is activated, the bell symbol will
be appeared on the display.
Alarm duration and snooze function:
Alarm Duration – Beep alarm or radio alarm will continue output for
30 minutes if no key press, then it will stop automatically and wait for
same alarm time on next day.
Action for Snooze :
- During alarming, press Snooze button (3) will enable snooze
function, Beep alarm or Radio alarm will stop.
- Snooze interval is 9 minute (not include second offset)
- Snooze will continue unless press ON/OFF button (4) to alarm off
of Buzzer alarm or Radio Alarm stop automatically after 30
minutes.
Display Auto on-off function:
- Press & hold the display auto on-off button (12) for 3 seconds, the
LED display Indicator will light on, the LED display will turn off
after 15 seconds automatically, Press any button to maintain the
LED display for 15 seconds.
- Press & hold the display auto on-off button (12) for 3 seconds, the
LED display Indicator will light off to cancel this function.
ENG-3