Manuels Connexes pour Granberg Baselift 6300H
Sommaire des Matières pour Granberg Baselift 6300H
- Page 1 Dok. Nr: M6300-ETL V: 1.0 2022-03-29 Installation Instructions / Instructions d’installation Baselift 6300H / 6300L 6300H 6300L 1,6” 4.1” WWW: Baselift 6300...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS / PRESCRIPTIONS DE SÉCURITÉ IMPORTANTES EN When using an electrical furnishing, basic precautions should always be followed, including the following: Read all instructions before using the BASELIFT. DANGER - To reduce the risk of electric shock: 1. Always unplug this furnishing from the electrical outlet before cleaning. WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons: 1.
- Page 3 Technical data / Données techniques EN Thank you for choosing to install a product from Granberg! In order for the product to work safely and securely, it is extremely essential that the installation instructions be followed. The installer should read and understand all the installation instructions before installation begins.
- Page 4 Planning / Planification EN Very Important! Check floor stability before installation. Maximum load on lifting unit is 220 lb (100kg) and dead load up to 220 lb (100kg). Ensure that the wall can withstand the concentrated load that occurs under motor units. Make sure that the motor units can be fixed to the wall and that the structure is not porous.
- Page 5 Electricity and Water / Électricité et eau (mm) EN The lifting unit requires one power outlet and consumes a maximum of 5A. If the counter has a sink, the connections for electricity, water and drain should be placed centrally below the mixer. FR L'unité...
- Page 6 Content of delivery / Contenu de la livraison Accessories / Accessoires 16 mm 12x 3x16 mm 2x M6x12...
- Page 8 L - 230 9.05”...
- Page 9 Leveler Niveleur...
- Page 15 B - 0.157” (4mm) 2.36” (60mm) 0.787 (20mm) > 4” > 2.3” 0.866” (22mm) 1.42” (36mm) For drawer Pour tiroir DWG NO. 10433 REVISION Granberg Interior AB Tel. +46(0)11197750 info@granberg.se TITLE: Frontfästen www.granberg.se DWG NO. 10433 REVISION T I T DRAWN MATERIAL:...
- Page 18 16 mm 6x 3 x 16 mm 0.157” (4 mm)
- Page 19 2x M6x12 HEX 4...
- Page 20 16 mm 6x 3 x 16 mm 0.98” (25mm) 0.98” (25mm) 0.39” (10mm) DWG NO. REVISION 04453 Granberg Interior AB Tel. +46(0)11197750 info@granberg.se TITLE: Täckskiva 120 www.granberg.se DRAWN MATERIAL: FINISH: CHECKED WEIGHT: SCALE:1:5 SHEET 1 OF 1 UNLESS OTHERWISE SPECIFIED:DIMENSIONS ARE IN MILLIMETERS...
- Page 22 Adjustment / Ajustement Leveler Wasserwaage...
- Page 23 Adjustment / Ajustement...
-
Page 24: Functional Tests
Functional tests Complete functional tests should be carried out after installation: Test run the lift unit up and down all the way to each end position. Make sure that the lift runs freely without obstacles, risk of pinching and noise. Make sure it remains at each end position. Make sure that no cables get pinched and that they are fixed. - Page 25 Before you use the device - Read the users manual Only authorized persons may use the this product! Authorization means obligation to read and follow the instructions. It is very important that you read and understands the users manual before you use the device. The user manual is attached as a separate booklet.
- Page 26 Granberg Interior AB Box 6112 600 06, Norrköping Tel: 011-19 77 50 E-mail: info@granberg.se Internet: www.granberg.se...