Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User Manual
KVM Gigabit Console Adapter
(No.38082/33)
If you are using several KVM console adapters and
several PCs to be remotely controlled in a network
you have to configure the software on every PC and
adapter.
Setting Client PC: To register, simply right click on
the blue device icon, move the cursor to the Set
Client PC option, and select the PC number. Once
successfully registered, your PC name will be
displayed on the list.
Note: The software must be prior installed and running on the computers to utilize this function.
Please do not connect the device before setting the Client PC, Up to 4 PCs can be registered
on one single KVM Gigabit Adapter. Using the hotkey CTRL+CTRL+port number you can
switch access among the 4 computers.
Enable Remote
Control Client:
To enable keyboard
and mouse access
from the adapter to
the host computer
you may have to
enable the Remote
Control Client via
the Options menu.
You may either click
the options menu from the main window or right-click the USB server icon.
All Adapters
Network settings
and USB server
configuration
The
adapter's
USB
Server network settings
can either be configured
via
the
USB
server
software, or through the
web interface. Using the
USB
Server
software
select
the
Options
menu and then use the Server Configuration option or use Open
Web Page of the USB Server.
To update or backup the firmware please use the menu Server Configuration.
The other settings can also be conveniently managed via the USB server's web page.
Please note that you also have to change the computer's IP addresses when changing the IP
address of the server in manual non-DHCP mode.
English
5
User Manual
USB Server Software
The USB Server software redirects USB device communication over the LAN ports and your
network. You may select a different language by clicking the OPTIONS menu. Network settings
like DHCP and IP address settings can be found under the menu Server Configurations.
LED Status Display on the adapters
LED
Color
Description
Power
Green
ON: Power OK
OFF: Power failure, check power supply
Link
Blue
ON or Flashing: OK, flashing for data activity
OFF: check LAN connection
Display Utility
Once the driver has been installed, the display utility will appear on the taskbar.
This utility allows you to quickly change the settings and resolution of your
Display over Gigabit Adapter. To access the menu, right click on the taskbar icon.
You may use the adapter for mirror mode (the monitor shows the same desktop as the primary
monitor), extended mode (the Windows desktop will be extended to the right, left, top or bottom
of the primary monitor). In addition you can select the additional monitor to be used as the
primary Windows monitor.
Select the Resolution menu or click Advanced to set the desired resolution. Depending on your
operating system and graphics card used the menus may look slightly different and offer slightly
different options and menus.
Windows 7 and Vista users may select the option "Optimize for Video". Please use this option
for video playback only and disable it for desktop use. For Windows 7 this option is
automatically enabled.
DisplayLink software works closely with the graphics card and there may be interoperability
issues with some graphics cards. If this happens:
1. Try to upgrade to the latest graphics drivers for your computer's graphics card.
2. Try to upgrade to the latest DisplayLink software.
3. If necessary, boot into Safe Mode and use Windows' Backup and Restore Center to recover.
Further details and updated setup information for various operating systems as well as FAQs
and troubleshooting can be obtained from www.displaylink.com.
English
6
Publicité
Table des Matières
