iwc INGENIEUR AUTOMATIC 3570 Mode D'emploi page 28

TA K I N G T H E B R A C E L E T A P A R T
ation (1) and, at the same time, slide the hinged link with the help
of the second tool about 3 millimetres sideways (2).
— 2 8 —
Open the folding clasp by pressing the
buttons on the side. Lay the bracelet face
down on a firm base. To avoid scratching
the bracelet and base, place a cloth
underneath the bracelet. Using the special
tool provided, you can now push down the
fixing bolt at the desired point of separ-
Pull the protruding hinged link out of the
bracelet (3). The bracelet is now separ-
ated.
I N G E N I E U R A U T O M AT I C