iwc INGENIEUR AUTOMATIC 3570 Mode D'emploi page 24

This watch has a screw-in crown. Screwing the crown in to its
normal position (X) prevents the inadvertent adjustment of the
time or date and also acts as a double seal to prevent water
from seeping into the case. To release the crown, unscrew it by
turning it to the left, where it automatically assumes position 0,
the winding position. By depressing the crown in position X and
turning it to the right at the same time, it is screwed down firmly
again and secured.
F U N C T I O N S O F T H E C R O W N
Normal position (screwed in)
X —
Winding position
0 —
1 —
2 —
N O R M A L P O S I T I O N
I N G E N I E U R A U T O M AT I C
— 2 4 —
X
Date setting
Time setting
0 1 2