Dometic TEC40D EV Notice D'utilisation page 21

TEC40D EV
10.2 Preparing maintenance work
!
CAUTION!
Note the following for all maintenance work:
• The generator must not be running.
• All the parts must be cooled down.
➤ Open the generator cover.
➤ Switch the generator to no function with the main switch (fig. 2 1, page 3).
➤ Disconnect the positive terminal of the supply battery.
For maintenance work, you can take the generator out:
!
WARNING!
The mounting plate with generator is very heavy (> 90 kg) and could fall
out the housing if you take it out too far.
➤ Undo the fastening screw (fig. 5 1, page 5).
➤ Remove the mounting plate (fig. 5 2, page 5) with the generator from the
housing.
10.3 Finishing maintenance work
➤ Connect the generator to the positive terminal of the supply battery.
➤ Switch the generator to standby with the main switch (fig. 2 1, page 3).
➤ Close the generator flap.
EN
Servicing the generator
21