De Dietrich DRS 915 JE Guide D'installation & D'utilisation page 32

32
9. Remove the squares and mark a distance
of 8 mm from the outer edge of the door
where the nail must be fitted (K).
10. Place the small square on the guide
again and fix it with the screws supplied.
Should the alignment of the furniture
door be necessary, use the clearance of
slots.
At the end of this procedure, it is neces-
sary to check if the door of the furniture
closes properly.
11. Fix cover (Hd) on the small square (Hb)
until it clips into place.