Frequently Asked Questions - Philips SPEECHMIKE LFH3200 Manuel De L'utilisateur

Masquer les pouces Voir aussi pour SPEECHMIKE LFH3200:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
7

Frequently asked questions

The operating system stops responding
after restart
Using the Philips SpeechMike together
with certain USB hubs may cause the
operating system to stop responding
when the computer is started.
Unplug the SpeechMike before starting the PC
and reconnect it afterwards. We recommend
replacing the USB hub or connecting your
SpeechMike directly to the USB port of the
computer.
The SpeechMike is completely without
function
Some computer providers limit the
output power of USB ports to 100mA.
These ports may not provide enough
power for the SpeechMike to function
properly.
Connect the SpeechMike via a self-powered hub.
User manual
The SpeechMike is connected to the
computer but sound will play on the
computer's speaker only
Windows XP can support only one
playback device at a time and may require
setting the playback device back to
"SpeechMike" if another playback device
was enabled after the SpeechMike was
installed.
Set via Start > Control Panel > Sound and
Audio Devices > Audio (tab)
Or, right-click the speaker icon if it's in the
toolbar and select Adjust Audio Properties
Windows Vista and Windows 7 can
support more than one playback device
at a time, but if you disable the device for
playback it is also disabled for recording.
You may need to right-click and select
"Show disabled devices" to change the
setting.
Set via Start > Control Panel > Sound >
Playback (tab)
Or, right-click the speaker icon if it's in your
toolbar and select playback devices
15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Speechmike lfh3205Speechmike lfh3300

Table des Matières