4
Use your SpeechMike Air
This chapter describes how to use the
SpeechMike with Philips SpeechExec dictation
software. If the SpeechMike is used with third-
party software other than Philips SpeechExec,
some features may not be present or function
differently. For detailed information, refer to the
documentation delivered with the software.
4.1
Create a recording
The docking station or the receiver module
1
must be connected to the computer with
the USB cable.
Press the
2
RECORD
d
recording and enter
•
The recorder window is displayed.
•
The record indicator light flashes red (in
overwrite mode) or green (in insert mode).
Press the
key and start speaking.
3
e
The record indicator light glows in red (in
overwrite mode) or green (in insert mode) while
recording.
For short pauses, press the
4
continue recording, press the
To stop recording, press the
5
Press the
6
• E OL/• • P RIO
recording as finished.
•
The dictation file is moved to the
dictations
folder.
•
The recorder window closes and the work list
window is displayed.
To assign priority status to the recording,
7
press the
• E OL/• • P RIO
a second.
D Note
•
For best results, speak clearly and keep the
microphone about 10 to 15 centimeters (4 to
6 inches) away from your mouth.
•
The maximum distance between the docking
station and the dictation microphone is 10
meters (33 feet). If you leave the reception
User manual
key to create a new
Record standby
mode.
key. To
e
key again.
e
key.
RECORD
d
key to mark the
Finished
key again within half
area of the docking station a vibrating alert
notifies you that the wireless connection
between the docking station and the dictation
microphone may become unstable. Re-enter
the reception area of the docking station.
When the wireless connection is interrupted,
the dictation microphone beeps and the
dictation software stops recording. See
about wireless connectivity
information about wireless connectivity.
Learn
on page 14 for more
15