Collomix Xo 20 NC Manuel D'instructions page 10

Warranty
The manufacturer offers a product warranty within the
scope of the delivery terms and in accordance with legal
/ country-specific regulations. Please include your pay-
ment receipt or delivery note with any warranty claims.
Please return the device to us if you detect any irregu-
larities. Complaints / claims can only be considered if
the device is delivered to the Collomix Service depart-
ment in a complete and undismantled state.
Any damage resulting from normal wear, overload,
improper handling, non-approved accessories or insuf-
ficient maintenance shall be exempt from the warranty.
Any repairs carried out by third parties shall release us
from any warranty obligation.
Any structural or functional changes to the device not
authorised by us shall result in the invalidation of the
warranty as well as the declaration of conformity.
Noise/vibration values
Measured values determined according to EN 60745
The A-weighted noise level of the device is typically:
Sound pressure
L
Xo 20 NC
Uncertainty K = 3 dB
Vibration total value (when stirring mineral substances
Emission value a
Xo 20 NC
Uncertainty K = 1.5 m/s
The stated technical data is subject to tolerances (corre-
sponding to the respective valid standards).
Emission values
These values make it possible to estimate the emissions
of the power tool and compare various power tools. The
actual load may be higher or lower depending on the op-
erating conditions and the condition of the power tool
or the attachments. For estimation purposes, take into
account work breaks and phases with lower loads. De-
fine protective measures for the user, e.g. organisational
measures, based on correspondingly adjusted estimated
values.
10
Sound power
[dB(A)] L [dB(A)]
pA WA
76 dB(a) 87 dB(A)
[m/s 2 ]
n
1.5 m/s 2
2
Subject to change
Manufacturer:
Collomix GmbH
Daimlerstraße 9
85080 Gaimersheim
Germany
www.collomix.com
EN