Installing Accessories; Ec Declaration Of Conformity - THERMOBILE AGA 111 Manuel De L'utilisateur

English
9

INSTALLING ACCESSORIES

9.1 Outside air suction set (fig. 9)
When a hose with a wall feed-through is
used, the combustion air can enter directly
from outside.
1. Make a hole in the wall to place the wall
feed-through (A).
2. Slide one end of the hose (B) onto the
inlet of the combustion air fan (C).
The air hose may have a maximum
length of 6 m.
3. Slide the other end onto the connection
of the wall feed-through (D).
4. Fix the hose at both ends with hose
clamps.
9.2 Connection diameter of air hose
The connection to the heater has a diameter
of 100 mm.
10 EC DECLARATION OF
CONFORMITY
For the EC declaration of conformity, go to
www.thermobile.nl.
22 40.020.955 - rev. 05 - 2017 AGA 111