RIKA COOPER Notice D'utilisation page 35

Delivery state stove
Note
During any conversion work, take particular care of your fingers and any
panels and stove attachments. Select soft bases to prevent scratches to your
living space furniture and stove panels.
1. COOPER RAO
Put the cover on the stove and turn the fixing screws in. Make sure the cover is
flush and adjust it with the adjusting screws.
If you turn the adjusting screws clockwise, the cover is lifting, then tighten the
fixing screws.
Note
Make sure that everything is air tight!
2. COOPER AH
Cut the rear wall along the perforation with a hacksaw.
Remove the screws of the flue outlet on top and of the rear blind cover.
Replace the flue outlet from the top and the rear cover against each other. Be
sure to remove the cover carefully not to scratch the panel.
#2
#3
Note
Make sure that everything is air tight!
For the mounting of the cover look up the description in „Cooper RAO".
#25
#25
|15
14