Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.6
Connecting the vent hose
FloCo-Top-1K
To prevent odours from the separated air, e.g. if the unit is installed
in kitchens.
Fig. 16: Vent hose
1.
Remove the cover using a screwdriver. Mount the enclosed
hose connection.
2.
Push the vent hose onto the hose connection and route it to the
tank next to the suction line.
3.
Fixate the vent hose with cable ties.
4.
Mount the other end of the vent hose to the de-aeration line or
the return connection of the withdrawal fitting at the tank to pre-
vent clogging.
5.
Use the enclosed hose connector for connection to the return
connection of the withdrawal fitting.
– English –
Mounting and commissioning
a
Vent hose
b
Hose connection
with O ring
23
Publicité
Table des Matières
