Intended Use; Unpacking And Checking Contents - skilsaw SPT5007-EA Mode D'emploi

This attachment allows SKILSAW SPT79A Medusaw™ walk behind saw to function as an early
entry concrete saw and is designed for residential and light commercial projects . Early entry saw
controls random cracking of the concrete by making early contraction cuts, often within 1 – 2 hours
after the finishing process is complete. The combination of the spring-loaded skid plate and the early
entry diamond wheel specifically designed for this application, allows early entry sawing while min-
imizing chipping and spalling of the cut edges .
For your own safety, never
WARNING
connect the saw to a power
outlet until all assembly steps are completed
and until you have read and understood the
entire instruction manual.
TOOLS REQUIRED: A screwdriver that accepts
standard 1/4" hexagonal bits is required to use
the T25 torx bit .
Separate all parts from the packing materials and
check each one against the "Loose Parts List" to
make sure that all items are accounted for before
discarding any packing material .
If any parts are missing, do
WARNING
not attempt to assemble the
early entry attachment until the missing parts
are obtained and are installed correctly.
LOOSE PARTS LIST
Item Description
Early entry attachment main
A
body
B Front locking bolt
C 1-1/2 inch depth stop
D Hex nut for depth stop
E Torsion spring assembly
F Line guide wheel
G Long bolt for line guide wheel
H Early entry diamond wheel
I T25 torx bit

Intended Use

Unpacking and Checking Contents

Qty
1
1
1
1
1
1
1
1
1
FIG. 1
A
B
H
-3-
C
E
D
F
G
I