Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ATTACHING THE FRONT PART
•
Ensure that the wave washer and the sealing
ring are properly seated on the front locking
bolt (Fig . 8a) .
•
Thread the front locking bolt into the opening
of the front knob on the early entry attach-
ment (Fig . 8c) .
•
Align the front locking bolt with its mounting
opening in the saw and first tighten the bolt
by hand, then further tighten 1/2 turn using
T25 torx bit (Fig.8b). Do not overtighten.
Assembly
FIG. 8a
FIG. 8b
Front
locking bolt
FIG. 8c
Front
locking
bolt
-10-
Wave washer
Sealing ring
Front knob
Mounting
opening
Publicité
Chapitres
Table des Matières
