emerio TFN-214473.1 Mode D'emploi page 10

Way 1:
1) Press and hold the power button for 5 seconds until the digital display shows "F" and "F" flashes quickly.
2) Tap "Next" on Fig.1. You will get Fig.2 that asks you to check the status of the indicator light. Tap "Blink
Quickly".
3) Wait until you get Fig.4 and then tap "Done" at the top right corner.
4) Now you can operate your device in the control interface. Tap buttons to set your appliance.
Way 2:
1) Press and hold the power button for 5 seconds until the digital display shows "F" and "F" flashes quickly.
Continue to press and hold the power button for another 5 seconds until the "F" flashes slowly.
2) Tap "Next" in Fig.1. You will get Fig.2 that asks you to check the status of the indicator light. Tap "Blink
Slowly". Continue to tap "Go to Connect" in Fig.3 to connect your mobile phone to the device's hotspot
"SmartLife-XXXX". After the hotspot has been connected, go back to the App.
3) Wait until you get Fig.4 and then tap "Done" at the top right corner.
4) Now you can operate your device in the control interface. Tap buttons to set your appliance.
Fig. 1
Fig.4
Fig.2
- 9 -
Fig.3