Vimar CLIMARADIO 01910 Notice Technique page 33

- Press the button to confirm and pass on to set the tempera-
ture T2; the display will show the reference value blinking
- Using the button, set the desired temperature T2.
- Press the utton to confirm and pass on to set the temperature
T3; the display will show the reference value blinking.
- Using the button, set the desired temperature T3.
- Press the button to confirm; the display will show the icon
dIFF and the related hysteresis that blinks on 00.2°C.
- Using the button, set the desired hysteresis.
- Press the button to confirm and pass on to set the tempera-
ture scale; the display will show the current temperature with the
unit of measurement blinking (°C Celsius or °F Fahrenheit).
- Using the button, set the desired unit of measurement (in Italy
they use °C).
- Press the button to confirm and quit.
• Creating the automatic program
With this procedure you can create the time program that, for each
day of the week, controls the room temperature (heating and air-
conditioning) according to the settings T1, T2 and T3.
- Press the button or the
enter the program creation menu; the display will show a blinking
arrow on the day of the week.
- Select the desired day with the
When creating the program you are always recommended to
start from Monday.
- Using the button, select the time; the display will
show 00:00 and alongside the set temperature level T1 or T2 or
T3.
button to
button.
29 - ENGLISH