Mounting The Product - afriso Flow-Control Mode D'emploi

5.3

Mounting the product

LEAKING PRODUCT
• Verify that you use a screwed pipe connection as per DIN 2353 with cylindri-
cal thread (G thread) and seal the screwed pipe connection with a flat gasket
or with suitable glue. Do not use Teflon tape or hemp.
Failure to follow these instructions can result in equipment damage.
INOPERABLE PRODUCT
• Verify that you do not interchange the burner hoses for the flow and return
lines.
Failure to follow these instructions can result in equipment damage.
 Verify compliance with the specified ambient conditions.
 Verify that the float housing points vertically to the top.
 Verify that an oil filter is installed in the supply line upstream of the prod-
uct.
Mounting
NOTICE
NOTICE
Flow-Control
EN
14