Philips SHC 8680 Mode D'emploi page 9

SHC8680new.qxd 04-05-2005
HiFi
PC
Computer
CD
10:23 Pagina 9
IMPORTANT!
• Make sure you switch off the receiver unit before charging.
WARNING!
• Before using the FM headphone for the first time, please ensure
that the battery is fully charged for at least 16 hours.
This will guarantee a longer operating lifetime of battery.
• This product complies with the latest safety regulations.
Please only charge the battery with the docking station provided
(SHC8680) or with fully compatible charger.
Audio connection (Transmitter station)
13 Connect one end of the audio cable (3.5 mm stereo plug) to the
transmitter's 3.5 mm stereo LINE IN jack.
14 Connect the other end of the 3.5 mm stereo cable to either:
a) The headphone output of an audio source, such as TV, HiFi or PC.
Adjust the volume level of the audio source to a fixed reasonably high level;
for example 25% of the maximum level.
• In case your audio source has a 6.3mm headphone output, use the
supplied 3.5mm to 6.3mm stereo adapter plug.
IMPORTANT!
• In case of certain TVs, the headphone jack output level can only
be adjusted after accessing the TV on-screen menu.
b) The line output of an audio source, such as REC OUT or LINE OUT
(with the Y-cable supplied).
• Check if the red RCA plug (right channel) is connected to the right
channel (red) of the audio source.
• Check if the white RCA plug (left channel) is connected to the left
channel (white) of the audio source.
• In case the audio source has an adjustable RCA output level,
adjust the output level to the highest acceptable undistorted level.
ENGLISH 9