mdp FIRST Mode D'emploi page 19

UK
FIRST-rev 01
NB: Choosing the charging curve.
It is extremely important to choose the correct
charging curve, one which is appropriate for the
battery's technology. An incorrect choice could
cause irreversible damage.
4This is particularly true for charging curves where
the charging voltage is higher than the manufac-
turers' recommended voltage levels.
4There is a high risk of overheating and emission
of noxious gases
4Charging curve 4 is compatible with LiFeSo4
batteries that have a BMS (battery management
system) installed.
4It is essential to consult the battery manufactu-
rer's recommendations.
Maintenance precautions.
4This device cannot be dismantled and thus the
PC board is inaccessible. It is strictly forbidden
to dismantle the housing for any reason. Electric
shock possible.
4In order to prevent risk of electric shocks during
maintenance, please follow closely all recom-
mendations below before any maintenance be-
gins.
4Any operation carried out to this effect must be
carried out by an authorized electrician.
In the event of damaged wires or cables, these
must be replaced by an authorized electrician.
The end user must not attempt to change them.
4The mains and battery connections must be dis-
connected before any work is carried out in order
to avoid transfer of energy
4Fuses must be replaced by fuses that have the
same characteristics and performance levels.