Priorit PRIODOC AS32 Série Mode D'emploi page 23

Installation Instructions for Suspension File Frame
Installing the support brackets:
SB A

Connect support bracket A (SB A) to support bracket B (SB B) by slightly turning the fastening
screws (6 x 70 mm)

Push the shelf support pin into the row of boreholes at the desired installation height to use as an
installation aid

Place the entire support bracket assembly onto the shelf support pin and push it against the rear
wall

Screw the fastening screws into the support brackets so that they are flush with the surface
Caution:
To guarantee the proper functioning of the suspension file frames the minimum distances shown in the
drawing must be adhered to!
EP.V.9906-3
SB B
6 x 70 mm
shelf support pin
23 von 88