Operation - Cartrend 10737 Mode D'emploi D'origine

1. On/Off switch
2. Handle
3. Storage compartment
4. Power plug
5. High-pressure hose
6. Quick coupling
7. Sleeve
8. Pressure gauge
9. Relief button
10. Trigger
11. Blow gun
12. Connecting nipple

Operation

Connect/disconnect blow gun
Attention!
Ensure the compressor is off before connecting or discon-
necting the blow gun!
1. To connect the blow gun [11], insert the connecting
nipple [12] in the quick coupling [7]. The sleeve [6]
automatically jumps to the front.
2. Verify the blow gun is fitted tight in the quick coupling.
Attention!
Hold the quick coupling [7] when disconnecting the blow
gun.
3. To disconnect the blow gun [11], pull back on the
sleeve [6] and disconnect the blow gun from the quick
coupling [7].
30
13. Duster nozzle
14. Air hose
15. Locking lever
16. Chuck
17. Ball needle
18. Bike adapter (Presta
valve)
19. Valve for inflatable toys
20. Valve adapter
21. Nozzles for inside Ø
from 8 mm
Case compressor