Lucimed Luminette Glasses 3 Mode D'emploi page 14

EN
E. How to charge my Luminette ?
Before using your Luminette® for the first time, we recommend to charge it.
To do so:
•
Connect the end of the micro-USB cable to the slot in your Luminette®
(see figure 1) and plug the other end (a standard USB) in the charger.
•
Plug the charger into the mains.
•
When the device is completely charged (the charge time is 2 hours), unplug
the charger.
You can also charge your Luminette® by connecting it to your computer using the
USB cable supplied.
Charge indicator:
•
When your Luminette® is charging, the 3 battery indicators will continually
flash slowly in a cycle.
•
When your Luminette® is fully charged, these 3 battery indicators stop
flashing and remain lit.
•
If there is an error (battery or circuit failure), one of the indicators flashes
rapidly without interruption.
The device may not be used when it is charging.
Battery life:
The battery life will depend on the intensity you choose. A correctly charged
Luminette® device should lit for at least 10 sessions.
When you turn the device off, between 1 and 3 battery indicators light up to give
you an indication of the remaining battery life (3 indicators = the battery is fully
charged; 2 indicators = the battery is 2/3 charged; 1 indicator = the battery is 1/3
charged; 1 flashing indicator = the battery is insufficiently charged to be able to
complete a session).
We recommend recharging your Luminette® when there is only one indicator
remaining when you turn the device off.
F. Switching on and off
Attention: before your first use, be sure you take off the protective film over the
14