Connection For Adjustment Of The Camera; Adjusting The Lens And Camera Angle - JVC TK-C205 Mode D'emploi

Installation and connection

Connection for Adjustment of the Camera

The MONITOR terminal is used when making various adjustments to the camera at installa-
tion.
IRIS LEVEL
Volume
* The power to the camera body must be ON when adjustments are performed.

Adjusting the Lens and Camera Angle

Camera angle, zoom and focus are adjusted.
Tilt lock
screws
Vertical rotation
E-14
Horizontal
Lock screw
Variable range120°
Setting switch
Adjustment
button
75Ω
termination
disconnected
Horizontal rotation
(adjustable range: 120°)
1.
Loosen the horizontal LOCK screw.
2.
Holding the both tilt lock screws, rotate
horizontally.
3.
Tighten the horizontal LOCK screw.
Vertical rotation
(adjustable range: +80°, –50°)
1.
Loosen the tilt lock screws.
2.
Holding the rotation levers, rotate
vertically.
3.
Tighten the tilt lock screws.
Monitor TV