• Warning: all objects (table, shelf, etc) must be over the appliance.
• To fix the appliance to the wall:
- Make 3 holes in the wall as showed in the figure C.
- Before making the holes, it is necessary to measure the distances A and B between the wall supports (6)
placed in the back side of the appliance.
- Insert the pads into the holes and next the screws.
- Do not insert totally the screws, doing this operation the head of the screw must be separated from the wall
for some millimetres.
- Place the appliance Mekong coincide the supports (6) with the screws.
- Next slide slightly to the left side to leave it correctly fixed.
INSTRUCTIONS OF USE
• Plug the appliance into the mains.
• Turn the thermostat knob (1) clockwise to its maximum position (MAX).
• Select the desired power through the power switches (2) taking into account:
- Pressing the 600 W switch: Minimum power.
- Pressing the switch 900 W: Average power.
- Pressing both switches: Maximum power.
• When the room reaches the desired temperature, turn the thermostat knob (1) anti-clockwise until the indicator
or indicator lights of the switches switch off which indicates that the thermostat has been disconnected.
• Leave it in that position and the thermostat will maintain the selected temperature with the consequent energy
saving.
• When you do not use the heater, switch off the switches, place the thermostat knob in the off position (0) and
unplug the appliance from the main.
MAINTENANCE AND CLEANING
• Before you proceed to cleaning, ensure the appliance is unplugged from the mains.
• Leave cool down the warm parts and clean with a soft dry cloth.
• Keep clean the air entrance and output grid.
• Never use chemical or abrasives, metal scourers, which may deteriorate the surfaces of the appliance.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
01 manual jata VT150N.indd 11
11
25/05/16 16:48