Publicité
Les langues disponibles
Les langues disponibles
Safety recommendations:
Warning: the installation and maintenance of this equipment
must be performed by qualified and authorized personnel
only.
The Sigma Power module is an extra low voltage (TBT)
power supply for all of Bodet Sigma line products.
The two 24 Vdc outputs must not be connected in parallel.
The Sigma Power uses the 110-230 Vac mains as its power
source. The installation must comply with IEC 264 standard
(NFC 15-100 for France).
A 16A 2-pole (phase-neutral) type C circuit breaker must
be installed and readily and quickly accessible. This circuit
breaker ensures the protection of the power supply and must
be tripped before performing any maintenance.
The Sigma Power must be installed in a cabinet or any
enclosure to provide electrical, mechanical, fire, water and
dust protection (pollution level II maximum).
The various cables must be attached in the cabinet or
enclosure to prevent pulling strain on the connectors.
Furthermore the wires of a same circuit must be attached
together near the connector to reduce the risk of a short if
one should come loose.
1 - ELECTRICAL INSTALLATION
Connect the power cable (L, N, and Earth – Fig. 1).
Be sure to follow the safety recommendations described
previously (breaker and cables).
Connect the 24Vdc outputs (Fig. 2).
Sigma Power supply module
Installation and Operation Instructions
When receiving goods please check nothing is broken otherwise make a claim near shipping company.
FIG. 1 :
8 x 24 Vdc outputs to
Sigma products
FIG. 2 :
2 - TECHNICAL FEATURES
► Primary power source: 100 to 240 VAC 50/60 Hz.
► Output voltage: 24 VDC.
► Maximum output current: 2 x 4.5 A.
► Power on Led.
► Rack dimensions: H 44 x L 483 x W 200 mm.
► Fits into a 19" rack.
► Operating temperature range: 0° to +50°C.
► Weight: 2 kg.
► Protection index: IP30.
► Electrical isolation: Class 1.
Complies with standards:
NF EN 61000-3-2 : EMC directive.
NF EN 61000-3-3 : EMC directive.
73/23/CEE/89/336 : Low vlotage.
100 to 240 Vac
24 Vdc outputs to
Sigma products
BP1 49340 TRÉMENTINES
FRANCE
Tél. 02 41 71 72 00
Fax. 02 41 71 72 01
www.bodet.fr
supply
Publicité
