livin flame Stavanger 6 Mode D'emploi Et D'installation page 81

If the glass is broken, do not attempt to light the stove.
Cleaning the surfaces
To clean the surfaces, use a rag dampened with water or with water and a neutral detergent.
The use of aggressive detergents or thinners can damage the surfaces of the
stove. Before using any detergent it is advisable to try it on a small section
out of sight or contact the Authorized Assistance Centre for information
regarding the product.
Cleaning the metal parts
To clean the metal parts of the stove, use a soft cloth dampened with water. Never clean the metal parts
with alcohol, thinners, petrol, acetone or other degreasing substances. If such substances are used, our
company declines any responsibility.
Eventual variations in the colour of the metal parts can be caused by an incorrect use of the stove.
It is necessary to daily clean the brazier and often clean the ash box. The lack
of cleanliness can prevent the starting of the stove, causing damages to the
stove itself and to the environment (possible emission of unbrunt material
and soot). Do not re-use the pellet possibly remained in the brazier due to no
starting-up.
CLEANING BY THE TECHNICAL
Check every year
Clean the combustion chamber
Remove the brazier and clean it of any residue. (photo 1)
Remove the central screw that holds the combustion chamber. (photo 2)
Remove the walls of the combustion chamber and clean the residue remaining behind this wall. (photo 3)
1
81
2
3