Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Display information
"OFF"
The stove is off or it is in a shutting down phase.
"FAN - ACC"
The stove is in the phase of preheating the resistor, preceding lighting.
"LOAD WOOD"
The stove is loading pellets. On the control board the LED resistance is on.
"FIRE ON"
The stove is in the flame stabilization phase (flame present).
"ON 1"
The stove is in the operational phase at minimum power.
"ECO"
The stove has reached the temperature set by the user and is in the energy
saving phase. In this phase it is not possible to modify the power setting.
If the temperature is set at 41°C the stove will remain in continuous
operation at the programmed work power without passing to the
economy mode (ECO).
"STOP FIRE"
The stove is in a self-cleaning of the basket phase; the smoke extractor runs
at the maximum speed and the pellet loader at minimum.
"ATTE"
You will read these letters when you try to start up the stove while it is
completing a cooling cycle. Wait until the cooling phase is completed before
proceeding with a new switching on.
67
Publicité
Table des Matières
