Technical Data; Parts Description - Ayce SH106 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

remove the plug from outlet. Do not pull the cord to
disconnect the plug.
17.
Do not use the appliance in wet or damp locations such
as bathrooms.
18.
Don't put sundries into the machine

TECHNICAL DATA

Model
Main Supply
Frequency
Output
Protection Class
Water Tank Capacity
Rated Max.Moisture Capacity
SH106
100-240 V~
50 / 60 Hz
25 W
II
2.2 L
≥ 200 ml/h

PARTS DESCRIPTION

6
1
2
7
3
4
8
5
OPERATION
1.
Operation condition
1)
The working environment for humidifier is when temperature is between 5˚C to
45˚C degrees Celsius, and relative humidity is lower than 80 %RH.
2)
Keep machine working under low mist level when room relative humidity is
higher than 70 % or in an enclosed room space.
3)
Use clean water lower than 40 degrees (pure water is recommended).
4)
Clean water tank and water flume when use again after a long time.
2.
Operation steps
1)
Get the water tank out of the machine, add water no more than marked water
level. Put the water tank on the machine bottom part steadily
2)
Plug in the power, and then press the control button, the machine starts
working under high mist output, light ring turn to blue color, Press the control
button again, Blue color turn to little dim and machine works under low output.
3)
When out of water, control panel turns to red color and blinking for 3 times, 30
mins later machine stops, and control panel keeps stable red color, Refill the
tank then turn on the machine to have machine working again.
4)
During the machine working, Machine will stop working when taking off the
tank, in case of putting on the tank, machine need to be turned on again to keep
working.
30 | 31
G
1.
Top cover
2.
Aroma box
3.
Water Tank
4.
Control button
5.
Bottom part
6.
Mist Nozzle
7.
Mist generation
8.
Power cord

Publicité

Table des Matières
loading

Table des Matières