Control Panel Operation - Walter Surface Technologies ICECUT300 Mode D'emploi

7) CONTROL PANEL OPERATION
ACCUDRILL™ Technology
Green Zone Yellow Zone
Perfect, try to keep in A little too much
the green zone for pressure on the drill
the best cut and ease off to get back
optimum machine to the green zone.
performance.
ACCUDRILL™ Technology
Designed for you to get the most out of your machine and
your cutters. ACCUDRILL has an easy to read panel that
indicates when you are drilling with too much force, which
will damage the machine and the cutters.
Allow the cutter to do the work and you will find that a much
smoother hole and faster drilling time is achieved.
Red Zone
Overload: Back off
immediately as too
much force will cause
the motor to cut off
if you continue.
9