Accumulator - HEBU medical TITANIUM II Accu Mode D'emploi Et De Service

EN

3 Accumulator

To take off the accumulator press the red coloured button to
unlock it. At the same time pull the accumulator upwards off the
saw, see
fig. 1
To attach to accumulator, pull it from top onto the rails until your
hear it snap in.
Accumulator status
To check the charge status of the accumulator, press the red button located on the side of the
accumulator, like in fig. 2. The real percentage of the battery charge condition is only indicated
when the power tool motor is stopped.
LED indicator
1 – 4 green LED
Continuous red light
Red flashing light
The electronics automatically switch off the motor prior to the battery being deep discharged.
Operate and charge the battery only within the battery operating-temperature range of 0 °C – 45
°C (32 °F – 113 °F). At the beginning of the charging procedure, the battery temperature must be
within the battery operating- temperature range.
18
fig. 2 Accumulator status
Meaning
Percentage of charge condition
Battery is almost empty
Battery is not ready for
operation
Oszillosäge TITANIUM II Accu
fig. 1 Removing the accumulator
Activity
Operation
Charge battery
Bring the battery into the battery
operatingtemperature range, then
charge