Features And Controls - Briggs & Stratton HONDA VOX Industrial 073022 Manuel D'utilisation

Features and Controls

Read this Operator's Manual and safety rules before operating your trash pump.
Compare the illustrations with your trash pump, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
G
H
J
K
L
A - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
B - Data Tag — Provides model and serial number of trash
pump. Please have these readily available if calling for
assistance.
C - Pump Faceplate — Remove to clean impeller.
D - Suction Inlet — Connect reinforced suction hose here.
E - Priming Plug — Fill pump with water here to prime
pump before starting.
F - Discharge Outlet — Connect discharge hose here.
G - Air Cleaner — Protects engine by filtering dust and
debris out of intake air.
H - Engine Speed Lever — Used to adjust engine speed to
control pump output.
J - Choke Lever — Prepares a cold engine for starting.
K - Fuel Shutoff Valve — Used to turn fuel supply on and
off to engine.
A B C D E
M N P Q
L - Recoil Starter — Used for starting the engine manually.
M - On/Off Switch — Set this switch to "On" before using
recoil starter. Set switch to "Off" to stop a running
engine.
N - Oil Drain — Drain engine oil here.
P - Oil Fill — Check and add engine oil here.
Q - Water Drain Plugs — Remove to drain water from pump
and flush internal components with clean water.
R - Pump Chamber — Be sure to fill with water before
starting.
Item Not Shown:
Strainer Basket — Used to limit passage of abrasive
materials into the pump.
F
R
9