Weighing Operation - Soehnle 63672 Mode D'emploi

Body monitoring
Always measure in bare feet. Personal data
must be programmed in first (page 9).
➀ Switch on scale and wait for "0.0" to appear in the
display.
➁ Select memory and confirm (
recently obtained readings are displayed in
sequence.
➂ You can step on the scale once the display shows
"0.0" along with the gender symbol.
Your weight will now be displayed.
Body monitoring starts at this point.
Please stand still until the analysis is complete.
Progress is shown in the form of a segmented
graphic display.
➃ Body-fat proportion as a percentage, body water
). The most
➄ You can now step off the scale.

Weighing operation

➀ Start the scale by pressing the
➁ Wait for a few seconds, until 0.0 appears on the
➂ Step on to the scale and stand still until your
➃ The scale switches off automatically after you
10
proportion as a percentage and body weight are
then displayed alternately in three-step sequence.
The scale displays "0.0".
The measurement procedure can now be repeated,
or another person can select his or her correspon-
ding memory and carry out a body analysis. Other-
wise the scale shuts down automatically after ten
seconds.
display.
weight is displayed.
step off it.
button.