Introduction; Pneumatic Pump; Hydraulic Pump; Specification - GE Druck PV 411A Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16

Introduction

The PV 411A hand-pump generates either pneumatic pressure and vacuum
or hydraulic pressure. The scissor-action handles provide pneumatic
pressure and vacuum generation and, in the hydraulic mode, provides
hydraulic pressure generation for system priming.

Pneumatic pump

A selector valve (7) vents the system, to atmosphere, between selections of
pressure and vacuum. Operating the scissor-action handles (5) provides
the pumping stroke, for pressure generation.
A volume adjuster (3) allows small adjustments of the system pressure.

Hydraulic pump

The selector valve (7) vents the system, to the reservoir, between selections
of pressure and vacuum (used in the priming process). The volume
adjuster (3) generates the required system pressure. A fluid reservoir (see
Figure 2), screwed into the inlet port (1), marked RESERVOIR, on the top of
the hand-pump completes the hydraulic circuit. A pressure relief valve (8)
can be adjusted to set a pressure between 30 and 700 bar.

Specification

Pressure range
Pneumatic .............................................................................0 to 60 bar
Vacuum .......................................................................... 0 to -0.95 bar *
Hydraulic .............................................................................0 to 700 bar
Maximum safe working pressure................................................700 bar
Hydraulic fluid
(maximum viscosity 150 cSt at 40°C)
.............................................................................. Demineralized water
................... or mineral-based oils (SAE 40W, ISO viscosity grade 150)
Hydraulic fluids must be compatible with:
Stainless steel, anodised aluminium, nitrile rubber,
PTFE, polypropylene, delrin, acrylic and nylon.
Pressure connections:....................................... ¼" BSP parallel female
Weight (approximate): .................................................................. 1.2 kg
Dimensions
Length ....................................................................................... 260 mm
Width ......................................................................................... 150 mm
Depth......................................................................................... 100 mm
* This value assumes atmospheric pressure at 1 bar and varies depending
on atmospheric pressure.
GE Druck PV 411A User Manual
1
K258 Issue No. 3

Publicité

Table des Matières
loading

Table des Matières