GE Druck PV 411A Manuel D'utilisation page 4

Introduction
This manual provides operating instructions for the PV 411A Pneumatic/
Hydraulic hand-pump compatible with the requirements of line operation.
The GE Druck PV 411A supersedes the Druck PV411.
The manufacturer has designed this equipment to be safe when operated
using the procedures detailed in this manual. The user must not use this
equipment for any other purpose than that stated. Only use hydraulic fluids
stated in the specification.
This manual contains safety and operating instructions that must be
followed to make sure of safe operation and to keep the equipment in a safe
condition. The safety instructions are either warnings or cautions issued to
protect the user and the equipment from injury or damage. Use suitably
qualified personnel and good engineering practice for all procedures in this
manual.
Pressure
Do not apply pressure greater than the maximum safe working pressure
stated in the specification.
Technical advice
For technical advice contact the manufacturer or subsidiary.
Symbols
The following symbols mark this equipment:
Read the manual before use.
Refer to the manual.
GE Druck PV 411A User Manual
Safety
i K258 Issue No. 3