Electric Connection - Fulgor Milano FVCD 270 Manuel D'installation

Assembly Instructions

ELECTRIC CONNECTION

• Before installing the appliance, make sure that any pre-existing electric plants are in compliance
with the Law and suitable for the plate data of the appliance to be installed (V, kW, Hz, and power
available).
• The appliance is provided with a 1.4 m three-pole power cord with the three terminals fitted with
ferrules for connection to a plug or to the mains. The socket must have a 10A fuse and must be
easily accessible.
AttentIon!
Make sure that the plug is accessible even after the unit has been installed!
• If the plug for the appliance is not easily accessible, the power supply network must be equipped
with devices for the omnipolar disconnection with an opening distance of the contacts that allows
complete disconnection in overvoltage category III conditions.
AttentIon! If the entire length of the cable is not used, Do not roll it up but leave it
free and make sure that it does not obstruct or endanger the passage of persons. Also
make sure that it is not crushed or bent.
AttentIon! Make sure that the power supply cable does not come into contact with any
types of liquid, sharp or hot objects and corrosive substances.
AttentIon! Do not allow children or animals to play with the power supply cable.
FVCD 270
29