Maintenance And Service - Bosch GLM 20 Consignes D'utilisation Et De Sécurité

Cause
Battery low indicator (a) appears
Battery voltage decreasing
(measurement still possible).
Battery low indicator (a) flashing; measurement not possible
Battery voltage too low
All indicators on the display flash
The measuring tool is defective.

Maintenance and Service

! WARNING
Do not immerse the measuring tool into water or other
fluids.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
Maintain the reception lens 7 in particular, with the same
care as required for eye glasses or the lens of a camera.
If the measuring tool should fail despite the care taken
in manufacturing and testing procedures, repair should
be carried out by an authorized after-sales service center
for Bosch power tools. Do not open the measuring tool
yourself.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the measuring tool.
ENVIRONMENT PROTECTION
Recycle raw materials & batteries instead of disposing
of waste. The unit, accessories, packaging & used
batteries should be sorted for environmentally friendly
recycling in accordance with the latest regulations.
Keep the measuring tool clean at all times.
-14-
Corrective Measure
Replace batteries
Replace batteries
Contact the Customer
Service