Product Description And Specifications; Technical Data - Berner BACDVC 10.8V LI Notice Originale

OBJ_BUCH-2458-001.book Page 10 Friday, March 27, 2015 11:20 AM
 Use the battery only in conjunction with your
Berner product. This measure alone protects
the battery against dangerous overload.
 The battery pack can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally. An internal short cir-
cuit can occur and the battery pack can burn,
smoke, explode or overheat.
Product Description and
Specifications
Intended Use
The vacuum cleaner is intended for vacuuming dry
materials that are not harmful to one's health.
Use the vacuum cleaner only after
WARNING
having received sufficient infor-
mation on its usage. A thorough introduction re-
duces operating errors and injuries.
Product Features
The numbering of the product features refers to the
illustration of the vacuum cleaner on the graphics
page.
1 Release button for dust cup
2 On/Off button
3 Battery charge-control indicator
4 Handle
5 Battery pack*
6 Venting slots
7 Motor housing
8 Dust cup
9 Crevice nozzle
10 Intake port
11 Battery port
12 Battery unlocking button
13 Opening
14 Filter seal
15 Filter assembly
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
10 | English

Technical Data

Cordless dry vacuum
cleaner
Art. No.
Container volume l
Vacuum, max. hPa
Airflow, max. l/s
Weight according
to EPTA-Procedure
01/2003 kg
Permitted ambient
temperature
– during charging °C
– during
*
operation and
during storage °C
Recommended
batteries BACP 10.8V S-B x.x Ah
Recommended
chargers
* Limited performance at temperatures <0 °C
Technical data determined with battery from delivery
scope.
Assembly
Battery Charging
 Use only the battery chargers listed on the ac-
cessories page. Only these battery chargers are
matched to the lithium-ion battery pack used in
your vacuum cleaner.
Note: The battery supplied is partially charged. To
ensure full capacity of the battery, completely
charge the battery in the battery charger before us-
ing your power tool for the first time.
The lithium-ion battery can be charged at any time
without reducing its service life. Interrupting the
charging procedure does not damage the battery.
The lithium-ion battery is protected against deep
discharging by the "Electronic Cell Protection
(ECP)". When the battery is empty, the machine is
switched off by means of a protective circuit: The
inserted tool no longer rotates.
 After the automatic shut-off of the vacuum
cleaner, do not continue to press the On/Off
button. The battery pack could become dam-
aged.
Observe the notes for disposal.
BACDVC 10.8V LI
219476
0.4
45
15
0.9
0...+45
–20...+50
BACC 10.8 V S
1 609 92A 16U • 27.3.15