Clatronic BS 1240 Mode D'emploi & Garantie page 41

5....-05-BS 1240
Damper:
Open the damper on the hose handle to adjust the airflow or to release objects clin-
ging to the nozzle.
Filter:
Your machine has three filter systems.
1. Transparent dust collection container
• The traditional dust bag system has been replaced by a transparent dust
collection container in which coarse dirt particles and tiny particles floating
in the air are swirled out of the suction air by the high speed of the air cur-
rent.
• The purchase of dust bags is no longer necessary.
• The quantity of dust can be easily read off at any time on the container,
which is also very easy to empty.
• Once the dust level has reached the MAX mark on the dust container, plea-
se proceed as follows:
1. Press button 5 to open the filter housing (see ABB. 1).
2. Remove the dust container (see ABB. 2).
3. Remove the contents of the dust container. In order to do this, press the
button on the dust container. Then close the lid of the dust container (see
ABB. 3 and 4).
4. Reinsert the dust container. Please leave the lid of the filter housing open.
2. Motor Protective Filter (in the Dust Container)
• Important: Always empty the dust container first before you remove the fil-
ter insert. The filter insert can be removed by pulling upwards. Please clean
the motor protection filter by tapping and brushing out gently.
• Reinsert the components.
• Every third time the dust container is emptied, or in the case of severe soi-
ling, clean the filter by allowing water to flow through the filter fabric against
the direction in which the vacuum cleaner blows.
• The dust container should only be reinserted when it is completely dry!
09.07.2004 14:50 Uhr
with rollers and can be adjusted to suit the circum-
stances
Carpet: make sure that the brushes on the floor nozzle
are deactivated when cleaning carpets. If this is not the
case, press the lever on the floor nozzle forwards with
your foot. In order to vacuum even surfaces, for exam-
ple, press the lever back with your foot. This activates
the brushes (you can tell whether this is the case by
checking that the brushes are visible on the floor nozz-
le).
Seite 41
41
GB