ANNEX
Disposal
Disposal of packaging and appliance
Sustainable materials were used in the manufacture of this appliance.
At the end of its life cycle, this appliance must be disposed of in
a responsible manner. You can obtain more information from the
authorities.
The packaging of the appliance is recyclable. The following materials
may have been used:
•
cardboard;
•
polyethylene foil (PE);
•
CFC-free polystyrene (PS hard foam).
These materials must be disposed of in a responsible manner and in
accordance with government regulations.
The appliance is marked with a crossed out wheeled bin symbol to
draw your attention to the requirement for the separate disposal of
domestic electrical appliances. This means that the appliance may
not be disposed of in unsorted household waste at the end of its
service life. The appliance must be taken to a special municipal waste
processing location for separated waste or to a dealer who provides
this service.
Collecting and disposing of domestic appliances separately avoids the
potential detrimental consequences for the environment and health that
can result from unsuitable processing. This ensures that the materials
used to make the appliance can be recovered and that substantial
savings in the use of energy and raw materials can be achieved.
Declaration of conformity
We hereby declare that our products conform to the applicable
European Directives, Regulations and requirements, as well as all
requirements in the standards to which reference is made.
EN 11