Using The Player With Another Component; Controlling Another Cd Player (Advanced Mega Control) - Sony CDP-CX455 Mode D'emploi

Using the Player with Another Component

Using the Player with Another Component
Controlling Another CD Player
(Advanced Mega Control)
This unit can control a second CD player (see
"Connecting another CD player" on page 8). Even
when a second CD player is connected, the controls on
both of the units will function. When you press the
play button on either unit, the operating player stops
and the idle player starts. Make sure that "2nd
DETECTED" appears in this player's display after
turning on both players. Note that, you cannot operate
all the functions of the second CD player (e.g. selecting
the desired album or a track whose track number is 99
or over with number buttons, etc.).
The controls indicated in the illustration below are
effective while the MEGA CONTROL button is lit.
To operate the master player, press MEGA CONTROL
so that the MEGA CONTROL button goes off, and to
operate the second player, press MEGA CONTROL so
that the MEGA CONTROL button lights up.
Note
When a second player is connected to the master player's
CONTROL A1II (or CONTROL A1) connector, be sure to play
MP3 files on the master player. In this configuration, MP3 files
may not play properly when played on the second player.
Play mode buttons
(CONTINUE/SHUFFLE/
PROGRAM/REPEAT)
H
GB
30
MEGA
CONTROL MENU/NO JOG
X x l AMS L
H
X
m/M
1
Press MEGA CONTROL on this player.
The MEGA CONTROL button and "2nd" in the
display light up. The display shows the current
disc number or Disc Name of the second player.
2nd NEXT DISC AT. HIT TRACK GROUP
* D I S C - 4
ALL 1 DISC S SHUFFLE REPEAT GROUP
PROGRAM 1 2 3 DELETE FILE FADE
MULTI CD TEXT HI LIGHT CD1 CD2 CD3
Current disc number or the Disc Name
2
Select the desired play mode.
To program tracks, use the controls on the second
player.
3
Press H on this player to start playing.
The play starts and the display shows the current
disc, track numbers, and the playing time of the
track.
While the MEGA CONTROL button is lit, you can
control the second player with the controls on this
player.
To control the master player again
Press MEGA CONTROL. The MEGA CONTROL button goes
off and you can control the master player.
To control the second player directly using the supplied
remote Z
Set CD1/2/3 on the remote to CD3 which is the same position
as the COMMAND MODE selector on the rear panel of the
second player.
COMMAND MODE
selector
x
./>
AT. MIN STEP SEC
* * * * * *