Indicators - ENAG CDS3 12V/80A Manuel D'utilisation

BOOST in OFF position
With this setting, the CDS3 charger produces a single-stage UI type load curve. It generates a constant
voltage, supplying the current required by the battery(ies). Recharging time depends on the state of the
battery, being longer than when the boost is in the ON position.

3.3.5. Indicators

INDICATOR
Green "ON"
Yellow "Boost / Absorption"
Yellow "Floating"
These indicators are visible from the front of the appliance through the light guides, thereby allowing
operation of the appliance to be monitored.
U out
charger
U floating
0
I out
charger
I nom
0
STATE
On
Off
On
Flashing
Off
On
Off
CDS3-3M-DEE
t
t
MEANING
- Charger is ON
- No or poor quality AC current
- Input fuse blown
or
or - Internal charger malfunction
- SW1 Switch:
Boost in OFF position
or - SW1 switch:
Boost in
Boost/Absorption phase completed
- SW1 Switch:
Boost in ON position and charger
in the Boost/Absorption phase
- Internal charger malfunction
or - Output fuse blown
Charger current < 15% rated current
(floating phase)
Charger current > 15% rated current
ON position and
38