Unloading The Dishwasher; Adjusting The Height Of The Rack - Bosch SHEM53Z22C Notice D'utilisation

When loading the silverware basket
you should avoid excessive contact
points and nesting of similar items
(allowing two spons to rest inside
one another).
A good way to avoid excessive
contact points is to load the
silverware basket with the lids
closed, inserting each piece of
silverware into one of the individual
slots.

Unloading the dishwasher

9 CAUTION
Dishes can be very hot
immediately after cycle ends.
Open the door slightly and allow
dishes to cool for a few minutes
before unloading.
Dishes are more likely to chip
Note:
when unloading before cooling.
When unloading the dishwasher, to
prevent water from dripping onto dry
dishes, unload the lower
rack 1j first. Next, unload the
silverware basket 1b followed by
the upper rack 12, and then the
third rack (if equipped).
Loading the Dishwasher en-us
Adjusting the height of the
rack
If desired, the height of the upper
rack 12 can be adjusted to create
more space for taller utensils either in
the upper or lower rack.
With silver- Upper rack
ware basket
Setting 1
max. ø
Setting 2
max. ø (26.5 cm)
Setting 3
max. ø
With Upper rack
third rack
Setting 1
max. ø
Setting 2
max. ø (20.5 cm)
Setting 3
max. ø
Arrange large plates up to a diameter
of 13.4 in (34 cm) in the lower
basket 1j as illustrated.
Lower rack
9.4 in 13.4 in
(24 cm) (34 cm)
10.4 in 12 in
(30.5 cm)
11.4 in 11 in
(29 cm) (28 cm)
Lower rack
7 in 13.4 in
(18 cm) (34 cm)
8 in 12 in
(30.5 cm)
9 in 11 in
(23 cm) (28 cm)
19