Temperature Setting And Controls - IARP Gamma 150 Instructions D'emploi Et D'entretien

TEMPERATURE SETTING AND CONTROLS

Each refrigerating appliance is provided with a thermostat for automatic maintenance of the appropriate
pre-established temperature inside the tank.
This temperature adjuster is gauged by the factory and should not be touched by the user.
Only if the average internal temperature is too cold or not cold enough should the knob (1) turned.
The numbers on the regulation plate are not related to temperature values but only to knob reference
position: a higher number corresponds to a lower temperature.
GAMMA 150
2
GAMMA 200-250
3
CONTROLS
1) Thermostat
2) Tank thermometer (motor space side)
3) Tank thermometer (no GAMMA 150)
4) Light switch (GAMMA S)
1
2
1
GAMMA 150 S
4
GAMMA 200-250 S
4
-10-
2 1
3
2
1