Standard Version - Zivan NG1 Manuel D'installation Et D'utilisation

ADDITIONAL FEATURES WITH AIR PUMP

Standard Version

The Air Pump technology generates a re-mix of the acid inside the battery by a constant delivery of air pumping.
The battery charger controls the air pump by an auxiliary contact (generally AUX1).
An air injection cycle along all the charging period is held as per requirements of the battery specifications.
Pressure sensor version
Further to the characteristics of the standard version it is also available an electronic circuit equipped with an air pressure sensor.
At the beginning of the charging process, the sensor verifies that the pressure in the circuit is included in a definite window between a
minimum and a maximum value (look at the following table). When an anomaly occurs the battery charger will modify the charging factor by
effecting a charge without detecting and controlling the Air Pump
Technical Features
Description
Power absorbed by the Air Pump
Input fuse
Maximal dimensions
Weight
Air Delivery*
Available pressure range
* To know the effective air delivery please refer to the plate values.
This device is in conformity with the Low Voltage directive 2014/35/EU and EMC
directive 2014/30/EU and their further modifications.
D01273-12
Battery charger NG1
Symbol Test Condition
P Air Pump controlled
ap
- Equipment interns
a×b×c Without connecting cables
- Without connecting cables
Q Air Pump controlled
Starting charging point
∆p
English
Value and/or Unit
Range
90 W
1,6 A
540×216×189 mm
7,5 kg
4÷13 l/min
50÷250 mbar
11